Optimate-weatherproof-copnnectors
  •  
  •  
  •  
  •  
  •  
  •   
  •  
  •  
  •  

Weatherproof your wiring with Opimate’s range of connectors…

Most electrical accessories designed for use on/with a motorcycle will get wet at some stage – after all, bikes are designed to be used outdoors. Keeping that moisture out of the electrical circuitry is crucial – even a small amount can cause intermittent faults and even total failure.
Optimate-weatherproof-connectors1
One of the most vulnerable points of any circuit is where connections are made, yet many accessories – even those designed for use during winter months, like heated clothing – aren’t routinely supplied with connectors that are able to keep out the elements.
Optimate-weatherproof-connectors2
OptiMate’s entire range of connectors and cables are weatherproof as standard. Compatible with the majority of accessories and add-ons currently available, they help to stop moisture causing problems and guard against any issues it might cause with the bike’s electrical system.
Optimate-weatherproof-connectors3
The range covers most of the connectors and leads needed to operate common accessories, like heated clothing, sat nav systems, smart phone chargers and battery optimisers. It includes:

  • SAE Connectors, compatible with all used in the industry, designed to accept OptiMate’s boot and cap or in-line seal that protects the connection against water, dust and dirt. Very useful whilst riding as the pins will not corrode, and in workshop/outdoor applications, where cables can end up trailing on the ground.
  • Custom battery clips; designed for square power-sport batteries, the flat tabs found on some small power sport and gel deep-cycle batteries, as well as the round posts common in automotive applications.
  • Moulded battery rings (M6/1/4”) specifically designed for power-sport batteries, a much better alternative to the common M8 / 5/16” ring.
  • Auto connectors (Ø21mm): plugs with built in fuse protection, sockets with retainer slots for the leaf springs and with sealing caps.
  • Bike (DIN) connector (Ø12mm): now fully moulded, and available in low profile 90 and 180-degree versions.
  • DC Ø2.5mm connectors commonly used in heated clothing, which have in-line seals/boots for every connection and a battery lead that comes with 16 gauge (1.31mm2) cable, rated to –40°C.

For details of the complete range of OptiMate connectors, leads and accessories – as well as their battery optimisers – and to find out how you can weatherproof your current kit, visit

www.optimate1.com